Aavid attachment tapes adhere heat sinks to a heat source while offering good thermal characteristics. They are extremely quick and easy to apply and require no curing time. These tapes can be electrically conductive or isolating and need no mechanical support to provide thermal or physical contact between the device and heat sink. Tapes are ideal for adding heat sinks after you have spun your board as use does not require a board change.
Pre-applied attachment tape are available with Aavid heat sinks to cut down on assembly time and costs. Tapes are available in custom cut size or in sheet size, typically 8.00" x 8.00".
|Ther-A-Grip 1050 / T404
Utilizes high-bond strength, pressure-sensitve adhesive. Maintains excellent electrical isolation.
|Ther-A-Grip 1090/ T412
Developed with an expanded foil carrier coated with high-bond strength acylic adhesive infused with aluminum oxide particles to enhance thermal performance.
|Ther-A-Grip 1070 / T405R
Features an aluminum foil core to provide additional thermal conductivity.
|T410R / T411
Complex tape variations with optimized adhesion features for plastic packages.
Ther-A-Grip 1050 / T404For ceramic or metal packages
Ther-A-Grip 1050 uses a 0.001 inch (0.03 mm) Kapton MT filled polymide film coated on both sides with high-bond strength, pressure-sensitive acrylic adhesive that is loaded with aluminum oxide particles. This provides both good thermal performance and excellent electrical isolation.
|Thickness||0.005 inch (0.13 mm)|
|Thermal Impedance||0.58 °C-in2/w|
|Thermal Resistance||0.37 w/m-k|
|Breakdown Voltage||5570 VAC|
|Volume Resistivity||3 x 1014 Ohm-cm|
|Lap Shear Adhesion||124 psi|
|Die Shear Adhesion|
Alum. Oxide 25°C
Alum. Oxide 150°C
|25°C @ 12psi
150°C @ 12psi
Ther-A-Grip 1070 / T405RFor ceramic or metal packages
Ther-A-Grip 1070 uses a 0.002 inch (0.05 mm) aluminum foil core coated on both sides with high-bond strength, pressure-sensitive acrylic adhesive that is loaded with aluminum oxide particles. The aluminum foil provides added thermal conductivity for applications where electrical isolation is not required. The combination of filter, expanded metal and embossed surface enhances both tape conformability and thermal performance.
Ther-A-Grip 1090 / T412For ceramic or metal packages
Ther-A-Grip 1090 uses an expanded foil carrier coated on both sides with high-bond strength, presure sensitive acrylic that is loaded with titanium diboride particles. The combination of filter, expanded metal and embossed surface enhances both tape conformability and thermal performance.
|Color||1070 / White||1090 / Grey|
|Thermal Impedance||0.54 °C-in2/w||0.25 °C-in2/w|
|Thermal Conductivity||0.50 w/m-k||1.40 w/m-k|
|Volume Resistivity||3 x 10-2 Ohm-cm||N/A|
|Lap Shear Adhesion||134 psi||70 psi|
|Die Shear Adhesion|
| Aluminum 25°C
| 125 psi
| 135 psi
| 25°C @ 12 psi
150°C @ 12 psi
T410R / T411
For plastic packages
T410R thermally conductive tape consists of a high bond strength, pressure sensitive acrylic adhesive loaded with aluminum oxide and coated onto a 0.002 inch (0.05mm) aluminum foil carrier. The other side of the foil carrier has a silicone pressure sensitive adhesive which provides excellent adhesion to silicone-contaminated plastics and other low energy surfaces.
T411 thermally conductive tape consists of a high bond strength, pressure sensitive adhesive with an aluminum mesh carrier layer. The mesh carrier allows the tape to conform to curved surfaces of plastic molded IC packages, providing a high adhesive strength attachment for heat sinks. The high performance silicone-contaminated plastics and other low energy surfaces.
|Adhesive (to heat sink side)||Acrylic||Silicone|
|Carrier||Aluminum Foil||Aluminum Mesh|
|Adhesive (onto component side)||Silicone||Silicone|
|Color (to component side)||Clear (Silver)||Clear (Silver)|
|Thickness, mm (inch)||0.18 (0.007)||0.28 (0.011)|
|Thermal Impedance @2/w (°C-in2/w)||7.1 (1.1)||6.5 (1.0)|
|Operating Temperature Range, °C||-50 to + 150||-50 to + 150|
|Lap shear Adhesion, psi (MPa)||60 (0.414)||14 (0.094)|
|Die shear Adhesion, psi (MPa) Steel/FR4